VSI Sand Making Machine

VSI Sand making machine

VSI sand making machine is the highest level of sand manufacturing equipment. VSI sand making machine is actually using dry sand model, mainly through crushing host and separator sieve as core production sand equipment. At the same time, it is also for concrete, dry mortar manufacturer of advanced technology to provide reliable protection support. So VSI sand making machine is reliable, energy saving, high-level mechanism sand production line.Service Online >

Mainly reasons due to the VSI Sand making machine supply of materials

blocking the exhaust pipe problem

We all know that if the exhaust pipe is blocked, the material can not be fed into the pipeline. To ensure that only the material to be transmitted from the pipeline, the next material to be absorbed by a sand mill. If the machine is blocked, it should be stopped.

the feed too fast

We all know that if the feed rate is too fast, the load will increase, resulting in a blocking problem. Therefore, we should operate according to the instructions of VSI Sand making machine.

the water content of the material

Sand making machine manufacturers made certain requirements of the material. If the water content is large, adhesion phenomenon occurs, blocking problems will arise, which will have an impact on productivity.

sand making machine working principle

VSI Sand Making Machine Causes Of Damage

In the production process due to improper use can cause damage to the machine often increases costs.

Sand making machine is not in there when the material started running, if doing so would start because too much pressure on the motor and burn out the motor. In addition there will be damage in other areas. So be sure to pay attention to the order of operations when the crusher is to start crusher, then fill join raw ore.

Second, any crusher its scope of application, Sand making machine is the same, it requires adding to the size of the ore material which can not exceed a certain size, if too large, it would make the ore material clogging the sand machine feed inlet. Then because of the need to clean the machine ranging from the impact to production, while it will damage the impeller because the stone is required to use the service.

Third, the equipment is to be maintained, otherwise the machine wear each other within the iron is very easily damaged. Sand making machine in the application of a period of time necessary to check whether the need to add oil, so as to make the machine more long-term use.

Fourth, the VSI Sand making machine is held together by screws, often strenuous exercise will loosen these screws. If abnormal Sand ring during use, it is necessary and timely shutdown for inspection. Find the cause of ring and tighten.

sand making machine structure

Performance characteristics of sand making machine

  • Wear less, durable
    In the production process of the sand making machine, the stone can form the protection of the bottom layer, the material is self-impact crushing, not directly contact with the metal components, but with the material lining impact, friction and crushing, reducing the wear of equipment and parts.

  • Significant energy savings, low production costs
    Sand making machine can be based on the nature of the material or broken requirements of the material on the different principles of broken, and broken pieces of sand after the re-processing equipment can be qualified as a gravel material can be used directly as raw materials, no other equipment Secondary processing work for customers to save production costs of investment.

  • Unique technology, parts excellence
    Sand making machine hammer with high wear-resistant high-Meng steel material, its impact resistance and toughness are very high, in addition, the rack are using a higher welding process, solid and stable, the work does not appear significant vibration , Equipment components excellence, advanced.

  • Sealed well, producing no pollution
    Sand making machine sealing components not only use the water seal components, the structure design is reasonable, compact, narrow the gap between the parts to prevent dust from entering. At the same time broken material in the machine within the vortex cavity clever air circulation, eliminating the dust pollution, do their best to minimize environmental pollution, to achieve a pollution-free production.

Technical Data

Model Feed at center&sides Feed at center Soft Material Hard Material REV (r/min) Power (kw) Motor Model Machine Size (mm)
Capacity (t/h) Max.Feeding (mm)
VSI7611 120-180 60-90 35 30 1700-1890 4-55×2 Y250M-4/55 4100×2250×2258
VSI8518 200-260 100-130 40 35 1520-1690 4-90×2 Y280M-4/90 4140×2280×2425
VSI9526 300-380 150-190 45 40 1360-1510 4-132×2 Y315M-4/132 4560×2450×2780
VSI1140 450-520 225-260 50 45 1180-1310 4-200×2 Y315L2-4/200 5100×2690×3200

Technical Data

Model Diameter of Bottom End of Conical Crushing Head(mm) max feeding size adjustment range of discharge opening capacity(t/h) power Rev. of Eccentric shaft Overall dimension(mm)
PYB600 600 75 12-25 40 30 356 2234×1370×1675
PYZ600 600 35 3-13 5-23 30 356 2234×137×1675
PYB900 900 115 15-50 50-90 55 333 2692×164×2350
PYZ900 900 60 5-20 20-65 55 333 2692×164×2350
PYD900 900 50 3-13 15-50 55 333 2692×164×2350
PYB1200 1200 145 20-50 110-168 110 300 2790×1878×2844
PYZ1200 1200 100 8-25 42-135 110 300 2790×1878×2844
PYD1200 1200 50 3-15 18-105 110 300 2790×1878×2844
PYB1750 1750 215 25-50 280-480 160 245 3910×2894×3809
PYZ1750 1750 185 10-30 115-320 160 245 3910×2894×3809
PYD1750 1750 85 5-13 75-230 160 245 3910×2894×3809
PYB2200 2200 300 30-60 490-750 260-280 220 4622×3302×4470
PYZ2200 2200 230 10-30 200-580 260-280 220 4622×3302×4470
PYD2200 2200 100 5-15 120-340 260-280 220 4622×3302×4470

The latest products

Request a quotation

Simply complete the form below, click submit, you will get the price list and a SBM representative will contact you within one business day. Please also feel free to contact us by email or phone. ( * Denotes a required field).