PE Jaw crusher

pe jaw crusher

there are two types of Jaw crusher namely compound pendulum jaw crusher and simple pendulum jaw crusher, in stone processing production line ,PE jaw crusher plays a major role in crushing process. PE Jaw crusher is mainly used for a variety of ores and bulk materials of medium-grained broken, widely used in mining, smelting, building material, highway, railway, water conservancy and chemical industry. Maximum compressive strength of the material to be broken as 320MPa. Service Online >

PE Jaw crusher essential tips

As one of the essential sand production line equipment, PE jaw crusher in its aspect is particularly prominent, according to many years of sand production line equipment, production and research, our clients summed up a few essential small jaw crusher knowledge, mastered it can not only improve the efficiency of the equipment and the maintenance of the equipment to a certain extent.

  • only when the crusher operation to work properly, it can be put into the material for production.
  • the material must be broken evenly into the crushing chamber, must not be added to the material from the side direction, nor filled with the material, so as not to overload or cause the device to withstand unilateral pressure overload.
  • when the crusher equipment to work properly, the bearing temperature must not exceed 30 degrees, the maximum temperature should not exceed 70 degrees, if during the work, jaw crusher temperature exceeds the above temperature, re-union immediately stop working check. After identifying the cause and take immediate measures to resolve.
  • After all four before the crusher equipment stops working, you must stop feeding, crushing cavity material waiting to be excluded, we can turn off the power, so do not easily lead to clogging of the crushing cavity occurs.
  • After in the jaw crusher work, if too much material because of the crushing cavity caused by parking, you should immediately turn off the power to stop working crusher for material clean up, clean up work before running again.
  • jaw crusher equipment in use for some time, we must carry out maintenance and repair work, check the stability of the various components.
  • if the end of the jaw has been worn, you can use a change of the head, so that both can be done fully utilized, but also save costs.

Technical Data

Model Feed Opening (mm) Max Feeding (mm) Discharge Opening (mm) Capacity (t/h) REV (r/min) Power (kw) Motor Model Machine Size (mm)
PE200×350 200×350 170 20-50 2-6 220 6-7.5 Y160M-6/7.5
PE250×400 250×400 210 20-60 5-20 310 6-15 Y180L-6/15 1450×1315×1296
PE250×750 250×750 210 20-60 8-22 320 6-30 Y225M-6/30
PE500×750 500×750 425 50-100 45-100 275 6-55 Y280M-6/55 1890×1916×1870
PE600×900 600×900 500 65-160 70-120 250 6-75 Y315S-6/75 2520×1840×2303
PE750×1060 750×1060 630 80-140 130-260 250 8-90 Y315L1-8/90 2620×2302×3110
PE900×1200 900×1200 750 95-165 220-380 200 8-130 JR127-8/130 3789×2826×3025
PE1000×1200 1000×1200 850 195-265 230-380 200 8-130 JR127-8/130 3889×2826×3025
PE1200×1500 1200×1500 1020 150-300 400-800 220 8-200 YR355M4-8/200 4930×3150×3700

The latest products

Request a quotation

Simply complete the form below, click submit, you will get the price list and a SBM representative will contact you within one business day. Please also feel free to contact us by email or phone. ( * Denotes a required field).